Ciao Mondo 3!

Wheel Stand Pro V2, stability at the right price - Detailed analysis and guide for the assembly

Indice articoli


Detailed analysis and guide for the assembly

Removing the stand from its package and from the plastic bag, we can easily notice its high weight and the fact that it is completely bent. The stand is totally made of steel and it has four big rubber feet that prevent the stand from sliding on any kind of surface. The locking system of the single parts is easy and effective, in fact it uses simple terminals which tighten the external tube against the internal one.

Wheel Stand_Pro_16  Wheel Stand_Pro_17  Wheel Stand_Pro_18

In the central part, there are four rubbers which will fix the pedal and prevent it sliding while pressing on the pedals. We can also find a big black steel tube which offers a big bearing surface to guarantee the maximum stability. In the central part of this tube, there is the name of the product and two screws that let us move this part of the stand back and forth.

Wheel Stand_Pro_19  Wheel Stand_Pro_20  Wheel Stand_Pro_21  Wheel Stand_Pro_22  Wheel Stand_Pro_23

Let’s move to the mounting phase of the stand, starting from the installation of the shifter bracket and of the TH8A. At first, we have to disassemble the central tube from the stand to make the wheel installation easier. After positioning the support bracket of the wheel perpendicularly to the tube, we have to screw the black bracket with an hex and a screw. After that, we have to install the wheel on the main bracket and tighten two other screws that will fix both the wheel and the gear bracket. After that, we have to fix the TH8A gear shifter with two screws at the ends of the bracket.

Wheel Stand_Pro_24  Wheel Stand_Pro_25  Wheel Stand_Pro_26  Wheel Stand_Pro_27  Wheel Stand_Pro_28  Wheel Stand_Pro_29

Now, let’s move to the installation of the T3PA pedals. We have to move the four rubbers in the most comfortable position to put the pedals on them, we have to fit the pedals with the central tube of the stand and then we have to turn all upside down. Now, we have to take the metal bracket, compatible with the T3PA pedals, and screw it.

Wheel Stand_Pro_30  Wheel Stand_Pro_31  Wheel Stand_Pro_32

After installing the pedals, we have to reassemble the central tube with the gear and the wheel in the whole part of the stand. We leave you some photos of the stand, complete and ready to be used.

Wheel Stand_Pro_33  Wheel Stand_Pro_34  Wheel Stand_Pro_35  Wheel Stand_Pro_36

Pubblicità


Corsair

Articoli Correlati - Sponsored Ads